Never used it before then but I am picking it up quite quickly. The contractor has gone now but we still have an ongoing issue with a new model of HP desktop. Then I copied the. That all worked great but the issue we have is now deploying the. I have the console enabled in the boot image so can F8 into DOS.
When I run an ipconfig all I get is:. Now looking on the internet it seems the boot image does not have the correct driver. I have downloaded the driver from HPs website, intels website and as a last resort toshibas website older version and injecting one by one the drivers into the boot image. Unfortunately none of them seem to be working ARGH! The image we are deploying is Windows XP 32bit. Even that didn't work. The boot image only has one driver at a time as to avoid any potential driver conflicts.
As well, if I enter the console and run ipconfig, there is no ip address or network device listed. I know my OSD works as I have no issues with a number of other systems in our district. Most of which are Dell. I have tried removing all drivers and adding in only those specific to the Optiplex Ive also tried adding in only the network driver, and then multiple combinations between chipset, video and audio drivers. Another thing I have tried is removing the add driver TS and injecting the drivers into the wim file.
Again no luck. The most luck I have had has been removing the add driver task sequence, and the TS makes it past "Setting up Windows and Configuration Manager". Once windows loads the first time all the rest of the steps fail as no network driver is found. Even in the Windows 7 images that have the driver injected. Afterwards I have tested that I have the correct driver by installing the one set up in the TS which works perfectly! I'm lost!! I'm not sure if my next step is to contact microsoft about the issue.
Anyways, if anyone may be able to shed some light on either of our situations that would be great! Thanks in advance Is there any errors listed in that at all? What are all the steps listed in your TS? I finaly got the Networking working by loading both a XP driver and a Vista driver. Now I can push Make sure to run the LiveUpdates. I just checked Ghost Explorer and I do have I went ahead and ran live update, but the Broadcom Employee.
Migration User. Posted Apr 09, PM. Reply Reply Privately Options Dropdown. I am trying to ghost a image of some new toshiba laptops we got in with Intel V Drivers and I can't seem to get the computer to notice any of the drivers when I boot it up. I have tried replacing the dos drivers with different versions of them. Didn't know if there was a certain version that anyone knows that works I could use. RE: Intel V Drivers. Do you have a link to the driver I would need I have tried different drivers off their website and either I have used the right one but didn't install it right or am using the wrong one.
That should make all the difference. Posted Apr 10, AM. Posted Apr 13, AM. I am booting an HP desktop, it boots fine and all seems to work, until you realize the IP address is I have tried all the Intel drivers including the DOS version. I can not get the boot wizard to accept the DOS version. The error message is "Failed to import driver Close Window. Does this apply to my network connection? Where can I get technical support? Need more help? Give Feedback.
Did you find this information useful? Thank you.
0コメント