Clawfoot tub installation

Always hand-tighten faucet components to prevent overtightening. Freestanding Installation Tips Freestanding clawfoot tub faucets are a great choice when there is ample room around the tub for the fixture. When installing freestanding clawfoot tub faucets, keep the following installation tips in mind: Make sure you have the appropriate plumbing lines for the faucet supply lines.

The supply lines will be installed directly into the floor, attaching to the underfloor plumbing. Freestanding faucets are meant to be installed on wood floors. For other flooring types, check with a professional plumber.

In some cases, you will need to build a specialized platform for the inlet connections. Follow the instructions included with the specific freestanding clawfoot tub faucet you purchase for best results. Shop Kingston Brass Installing a new clawfoot tub faucet can help spruce up any bathroom.

Share Post. Tristan O Donnell. Related posts More details. More details. December 30, at pm by Tristan O Donnell. Tags 2. At the base, the diverter mounts directly to the externally threaded pipe coming up from your clawfoot tub faucet body using a rubber washer and another coupling nut to create a water-tight seal.

This image also shows where the handheld shower hose attaches to the threaded pipe on the side of the diverter. Here is a closer look at the diverter connection. The nut slides up and over the riser. The compression washer also slides up and over the end of the riser pipe and then, the nut threads on to the hand shower diverter. As you tighten the nut, you will secure and seal the connection between the riser pipe and the diverter.

Here is a more detailed look at the hand shower pole cradle bracket and the riser coupler. The pole cradle slides over the riser and is held in position by the set screw. The lower riser pipe threads into the bottom of the coupler and the upper riser to the top of the coupler. Use teflon tape on the riser threads. See the close-up here to illustrate how the rail connector brings all the pieces together. The arched spout for the showerhead rises from here, the left and right curved shower curtain bars hook on with set screws, and the wall support threads on to the back.

When assembling the clawfoot tub shower curtain enclosure wall support, note that both ends are threaded. One threaded end will screw in to the threads of the wall support rail connector. The other end can be trimmed as needed. It will be secured by a set screw. Here is the wall support bracket in detail.

Mounting screws hold the flange to the wall. A set screw secures the end of the support rod in the wall support bracket. You can cut the Claw foot shower enclosure wall support tube to fit your specific needs as it only threads into the rail connector, not the wall bracket. The ceiling Support bracket assembles in much the same way as the wall support bracket. One end of the rod threads into the ceiling support rail connector.

The other end of the support bracket fits, but does not thread into the socket of the ceiling support bracket. It is secured by the set screw. You can also cut the ceiling support to fit your requirements.

After reading through the how-to install guide, you may still have some questions. If you don't want to create your own kit, choose one from our great, already built, Clawfoot Tub Shower Kits! We recommend you have a plumber help you with the installation, however if you take the time to learn about the different elements that make up a clawfoot bathtub shower package you will find it possible to install yourself.

For additional installation information, check out our clawfoot tub shower video installation guide. We wrote this installation guide because we wanted to help our customers understand what they are buying and assist you with making an informed decision.

Many people like to look over installation instructions prior to purchase so they can be sure the clawfoot tub fixtures sold will work for their particular situation. Our goal here is to help you buy the proper clawfoot tub shower hardware so you can enjoy the full benefit of your new or vintage clawfoot tub! If it is leaning too much in one direction, it will not drain all the way.

Use a framing level when placing the tub to check the levelness of the installation, and then install rubber shims under the claw feet where necessary.

Use rubber instead of wood as they are more resistant to movement and slippage. You can also screw or nail the shims in place in the case of tubs that are more prone to movement, such as those in the center of a room.

Tim Anderson has been freelance writing since He spent more than 15 years as a third-generation tile and stone contractor before transitioning into freelance writing.

By Tim Anderson. Related Articles.